Flow inputs by the Knife and Heart Rivers tend to peak in the spr

Flow inputs by the Knife and Heart Rivers tend to peak in the spring with snow melt, occasionally briefly peaking above 850 m3/s, but decreasing to nearly 0 m3/s during the late summer and fall. The mean discharge is 15 and 8 m3/s for the Knife and Heart Rivers, respectively (see USGS streamgage 06340500, and 06349000 for information on the Knife and Heart Rivers, respectively). Two major floods have occurred since dam regulation: the largest flood, which is the subject of additional studies,

occurred in 2011 with a discharge of 4390 m3/s (Fig. 2). The other major flood in 1975 had a discharge of 1954 m3/s. Previous studies on the Garrison Dam segment of the Missouri River provide a useful context and data for this study (Biedenharn et al., 2001 and Berkas, 1995). Berkas (1995) published Selleck Erastin a USGS report on the sources and transport of sediment between 1988 and 1991. Grain size data presented in Fig. 8 GABA receptor signaling of this report is presented from Schmidt and Wilcock (2008) along with data collected during this study to document textural changes in the bed downstream of the

dam. The interaction of the effects of the Garrison Dam and Oahe Dams were estimated using two primary sets of data: (1) historic cross-sections from the U.S. Army Corps of Engineers (USACE) from various years between 1946 and 2007, (2) aerial photos for the segment between Garrison Dam and the city of Bismarck from 1950 and 1999. USACE has surveyed repeat cross-sections every few river kms downstream of the Garrison Dam for a total of 77 cross sections over 253 km. Different sections of the river are surveyed every 1–8 years from 1946 to present offering an extensive but often

temporally unsynchronized snapshot of the river. A total of 802 surveys were entered into a database and analyzed for changes in cross-sectional area and minimum bed elevation. Cross-sectional areas were calculated using the elevation of the highest recorded water level during the survey period at-a-station (Eq. (1)). The river is heavily managed for flood control and since dam construction only one event (May 2011) has overtopped the banks. Therefore, it can be assumed that the highest recorded water height prior to 2011 (H, Eq. (1)) at each cross-section approximates de facto bankfull conditions during normal dam operations. equation(1) H−Ei=ΔEiwhere H is bankfull height (m), E is survey elevation (m), i is a location Sitaxentan at a cross-section, and ΔE is the calculated elevation difference. Cross-sectional area for each year was determined using this fixed height (Eq. (2)). equation(2) Σ(ΔEi+ΔEi+1)2×(Di−+Di+1)=Awhere D is the cross-stream distance (m) and A is the cross-sectional area (m2). The percent change in cross-sectional area, was calculated by subtracting the cross-sectional area from the oldest measurement from the relevant year measurement and divided by the oldest measurement. Not every cross-section was surveyed each year thus the oldest time frame can vary from 1946 to 1954.

Leave a Reply

Your email address will not be published. Required fields are marked *

*

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>